
SVC-05 · Done at our partner workshop in Auckland
Cut and polish in Auckland.
Machine polishing that removes swirl marks and light scratches and brings back colour and depth.
What it is
Cut and Polish, explained.
Over time paint picks up fine scratches, swirl marks from washing, and a dull film from the sun. A cut and polish removes them by machine in stages.
The cut stage levels a very thin layer of clear coat to take the marks out. The polish stage refines the surface to a deep gloss.
Why it matters
What you get out of it.
Brings back the colour
Dull, hazy paint regains its depth and reflection.
Removes swirl marks
The fine circular scratches you see in sunlight are polished away.
The right base for protection
Coatings and film look their best over corrected paint.
How it works
From first call to handover.
Wash and decontaminate
Bonded grit is removed so it cannot be dragged across the paint.
Inspect and test
We check the paint under strong light and polish a small test area first.
Cut
Marks are levelled with a cutting compound, using the least aggressive method that works.
Polish and protect
A finishing polish brings up the gloss, followed by protection.
Options and brands
Choices we can talk you through.
Single-stage polish
A gloss boost that removes light marks. Suits newer or well-kept paint.
Multi-stage correction
Cut then polish, for heavier swirls, scratches and oxidation.
Brands we use
3M · Avery Dennison · Koch-Chemie
Warranty
Our workmanship and the films we fit are covered by warranty. We confirm the terms for your job in writing with your quote.
Questions
Asked often.
Will it remove every scratch?
Scratches you can catch with a fingernail are usually too deep to remove fully. We can often make them much less visible.
Is polishing bad for the paint?
It removes a very small amount of clear coat, so we do only what is needed and no more.
How do I keep the finish afterwards?
Wash by hand with clean mitts and consider a ceramic coating to protect the corrected paint.
Where is the work done?
At our partner workshop in Auckland, under proper lighting.
Our work
See the results.
Before and after photos from AutoDe jobs, with a slider to compare.
Talk to us
Get a quote.
Tell us about the vehicle and what you want done. A few photos help us quote accurately.

